Loading ...
Loading ...
Loading ...
User Guide 136
Configuring DDM (Only for Certain Devices) DDM Configuration
â– Configuring the Bias Current Threshold
Figure 2-4 Configure Bias Current Threshold
Follow these steps to configure DDM‘s bias current threshold:
1) In the Bias Current table, select one or more SFP ports to configure bias current
threshold on the SFP ports.
High Alarm Specify the high bias current threshold for the alarm. When the operating
parameter rises above this value, action associated with the alarm will be taken.
The valid values are from 0 to 131.
Low Alarm Specify the low bias current threshold for the alarm. When the operating
parameter falls below this value, action associated with the alarm will be taken.
The valid values are from 0 to 131.
High Warning Specify the high bias current threshold for the warning. When the operating
parameter rises above this value, action associated with the warning will be taken.
The valid values are from 0 to 131.
Low Warning Specify the low bias current threshold for the warning. When the operating
parameter falls below this value, action associated with the warning will be taken.
The valid values are from 0 to 131.
LAG Displays the LAG number which the port belongs to.
2) Click Apply.
Loading ...
Loading ...
Loading ...