Loading ...
Loading ...
Loading ...
Configuring DDM (Only for Certain Devices) DDM Configuration
User Guide 135
â– Configuring the Voltage Threshold
Figure 2-3 Configure Voltage Threshold
Follow these steps to configure DDM‘s voltage threshold:
1) In the Voltage table, select one or more SFP ports to configure voltage threshold on
the SFP ports.
High Alarm Specify the high voltage threshold for the alarm. When the operating parameter
rises above this value, action associated with the alarm will be taken. The valid
values are from 0 to 6.5535.
Low Alarm Specify the low voltage threshold for the alarm. When the operating parameter
falls below this value, action associated with the alarm will be taken. The valid
values are from 0 to 6.5535.
High Warning Specify the high voltage threshold for the warning. When the operating parameter
rises above this value, action associated with the warning will be taken. The valid
values are from 0 to 6.5535.
Low Warning Specify the low voltage threshold for the warning. When the operating parameter
falls below this value, action associated with the warning will be taken. The valid
values are from 0 to 6.5535.
LAG Displays the LAG number which the port belongs to.
2) Click Apply.
Loading ...
Loading ...
Loading ...