Loading ...
Loading ...
Loading ...
User Guide 252
Configuring VLAN-VPN (Only for Certain Devices) Configuration Examples
from VLAN 100 and VLAN 200 will be transmitted through VLAN 1050 and VLAN 1060
respectively.
Here we only introduce the configuration scheme on Switch 1 and Switch 3, for the
configurations on Switch 2 are the same as that on Switch 1, and the configurations on
Switch 4 are the same as that on Switch 3.
1) Configure 802.1Q VLAN on Switch 1. The parameters are shown below:
VLAN 100 VLAN 200 VLAN 1050 VLAN 1060
Port 1/0/1 - - Tagged Tagged
Port 1/0/2 Tagged Tagged Untagged Untagged
2) Configure 802.1Q VLAN on Switch 3. The parameters are shown below:
VLAN 100 VLAN 200 PVID
Port 1/0/1 Untagged - 100
Port 1/0/2 - Untagged 200
Port 1/0/3 Tagged Tagged Keep the
default value
3) Configure VLAN VPN on Switch 1. Set port 1/0/1 as NNI port and port 1/0/2 as UNI port;
configure the TPID as 0x9100; map VLAN 100 to VLAN 1050 and VLAN 200 to VLAN
1060.
Demonstrated with T2600G-28TS, this chapter provides configuration procedures in two
ways: using the GUI and using the CLI.
4.2.3 Using the GUI
â– Configuring Switch 1:
1) Go to L2 FEATURES > VLAN > 802.1Q VLAN to create VLAN 100, VLAN 200, VLAN
1050 and VLAN 1060. Configure the egress rule of port 1/0/2 in VLAN 100 and VLAN
200 as Tagged, and Untagged in VLAN 1050 and VLAN 1060; Configure the egress rule
of port 1/0/1 in VLAN 1050 and VLAN 1060 as Tagged.
Loading ...
Loading ...
Loading ...