Mountfield MTF 72H Petrol garden Tractor lawn rider sports a STIGA ST 350 352cc engine

Translation of the original instruction - Page 64

For MTF 72H. Also, The document are for others Mountfield models: F 72 FL, F 72 FL HYDRO

PDF File Manual, 118 pages, Read Online | Download pdf file

MTF 72H photo
Loading ...
Loading ...
Loading ...
9
WARNING! Reverse must only be en-
gaged when the machine is stopped.
5. OPERATING INSTRUCTIONS
5.1 SAFETY RECOMMENDATIONS
WARNING! If the machine is likely to
be used mostly on sloping ground (never
steeper than 10°), fit counterweights (sup-
plied on request (see 8.1) beneath the
cross-member of the front wheels. These
improve stability at the front and reduce the
chances of tipping over.
IMPORTANT All the references relating to
the positions of controls are those described in
chapter 4.
5.2 WHY THE SAFETY DEVICES CUT IN
The safety devices work in two ways:
they prevent the engine from starting if all the

by stopping the engine if even just one of the

a) To start the engine, it is necessary that:
the transmission is inneutral”;
all the cutting means are disengaged;
the operator is seated.
b) The engine stops when:
the operator leaves his seat;
the grass catcher is lifted when the cutting
means are engaged;
the parking brake is engaged without disen-
gaging the cutting means;
the cutting means is engaged without the
grass catcher in place;
the parking brake is engaged without disen-
gaging the cutting means.
 
the parking brake on.
5.3 PRELIMINARY OPERATIONS BEFORE
STARTING WORK
Before starting to mow, it is necessary to carry
out several checks and operations to ensure

5.3.1 Seat adjustment (Fig. 5.1)
-
ing bolts (1) and slide it along the slots.
Once you have found the right position, tighten
the four screws (1) thoroughly.
5.3.2 Tyre pressure (Fig. 5.2)
Having the right tyre pressure is the main condi-
tion for ensuring that the cutting-means assem-
bly is horizontal and mows evenly.
Unscrew the valve caps and connect a com-
pressed air line with a gauge to the valves and
adjust the pressure to the indicated values.
5.3.3 Filling with oil and fuel
NOTE The type of oil and fuel to use is given
in the engine manual
To reach the oil dipstick, turn the seat over and
open the cover underneath.
-
ing to the instructions in the engine manual, this
must be between the MIN and MAX marks on
the dipstick. Fig. 5.3)


DANGER! Refuelling should be carried
out in an open or well-ventilated area with
engine stopped. Always remember that pet-
rol fumes are inflammable. DO NOT TAKE A
NAKED FLAME TO THE TANK’S OPENING
IN ORDER TO SEE THE TANK’S CONTENTS
AND DO NOT SMOKE WHEN REFUELLING.
IMPORTANT Do not drip petrol onto the plas-
tic parts to avoid ruining them. In the event of ac-
cidental leaks, rinse immediately with water. The
warranty does not cover for damage to plastic
parts of the bodywork or the engine caused by
petrol.
5.3.4 Fitting the guard at the exit
(grass catcher)
WARNING! Never use the machine with-
out having fitted the exit guard!
Lift the mobile cover (1) and hook on the grass
catcher inserting the two joint pins (2) in the
holes on the two supports (3) Fig. 5.5).
5.3.5 Checking machine safety

1. Check that the safety devices function as de-
scribed (see 5.2).
2. Check that the brake is in perfect working
order.
3. Do not start mowing if the cutting means
vibrate or if you are unsure whether they are
sharp enough. Always remember that:
A badly sharpened cutting means pulls at
Loading ...
Loading ...
Loading ...