Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
88 / 2 3 6 W W W. S I G L E N T. C O M
with the positive edge as shown in the figure below.
Touch the Source area to select trigger source, and touch the Slope area to
select rising or falling.
Rising -- Only trigger on the positive slope
Falling -- Only trigger on the negative slope
Adjust Upper/Lower Level
The slope trigger requires upper and
lower trigger levels. When the trigger
type is slope trigger, touch the trigger
descriptor box, the pop-up quick menu
will show two levels.
The upper/lower level can be set in the
following two ways:
1. Touch the Level Upper area in the quick menu to select the upper level,
and then set the level value by the virtual keypad or the Level knob on
the front panel. To set the lower level is the similar.
2. Use the Level knob on the front panel directly to set the level value.
Loading ...
Loading ...
Loading ...