Loading ...
Loading ...
Loading ...
SDS5000X Series Digital Oscilloscope User Manual
154 / 236 W W W. S I G L E N T. C O M
A. Turn on or off math operation
B. Select the operation
C. Select the source. The number of sources
corresponding to different operators is
different. Addition, subtraction,
multiplication and division have two
sources, while others have only one.
D. Set the vertical scale of the math operation
E. Set the vertical position of the math
operation. The vertical scale and position
of the math can also be set by knob,
referring to "Decode/Digital/Math/Ref ".
F. Turn on or off invert, that is similar to the
process used in "Vertical Setup".
Units for Math Waveform
Different operations corresponding to the operation results have different
dimensions. Therefore, the units displayed in Scale are different:
Math Operation
Unit
Addition (+) or
Subtraction (-)
V, A, or U (used when the units of two sources are not
consistent)
Multiplication (x)
V
∧
2, A
∧
2, or W
Division (/)
None, Ω (Resistance unit Ohm), S (conductance unit
Siemens)
FFT
dBVrms, Vrms, dBArms, Arms, dBm
d/dt
V/S (Volt/Second) or A/S (A/Second)
Loading ...
Loading ...
Loading ...