Loading ...
Loading ...
Loading ...
88
Parameter
Function
Address
It is to set corresponding device address.
Note:
Make sure the address is the same as that of the device,
otherwise it will fail to control the device.
Baud Rate
It is to select the baud rate used by the device.
Data Bit
It is 8 by default.
Stop Bit
It is 1 by default.
Parity
It is none by default.
Table 4-22
Step 3
Click “Save” to complete config.
4.3.2 Function
4.3.2.1 Preset
Preset means the current environment in which the camera is located, users can adjust the PTZ and
camera to the environment quickly via calling preset.
Step 1
Select “Setup > PTZ Setting > Function > Preset”.
The system will display the interface of “Preset”, which is shown in Figure 4-64.
Figure 4-64
Step 2
Loading ...
Loading ...
Loading ...