Loading ...
Loading ...
Loading ...
56
Default gateway
Make sure it has to be in the same
segment with IP address according to the
actual situation.
Note
It inputs 128 bit
for IP address,
default gateway,
preferred DNS,
alternate DNS of
IPv6 version, it
can’t be null.
Preferred DNS
DNS server IP address.
Alternate DNS
Alternate IP address of DNS server.
Enable
ARP/Ping to set
device IP
address service.
Check, you can use ARP/Ping command to modify or set the
device IP address if you know the device MAC address.
When it is enabled by default, ping packet can set device IP via
specific length within 2 minutes during device reboot, the
service is off 2 minutes later, the service will be closed
immediately after setting IP successfully. Ping packet can’t set
IP if it is not enabled.
Table 4-12
Step 3
Click “Save” to complete setting.
An example of setting device IP via ARP/Ping
Step 1
Get an unoccupied IP address, and make sure the device and PC are in the same LAN.
Step 2
Get the physical address of the device from the label.
Step 3
Input the following commands in the PC.
System
Command
Windows syntax
Arp -s <IP Address> <MAC>
Ping -l 480 -t < IP Address >
Example：
Arp -s 192.168.0.125 11-40-8c-18-10-11
Ping -l 480 -t 192.168.0.125
UNIX/Linux/Mac
syntax
Arp -s <IP Address> <MAC>
Ping -s 480 < IP Address >
Example：
Arp -s 192.168.0.125 11-40-8c-18-10-11
Loading ...
Loading ...
Loading ...