Loading ...
Loading ...
Loading ...
109
Parameter
Note
Direction
It is set the direction of tripwire, you can select A→B、B→A、A↔B.
Alarm track
Check it and it will generate alarm track when the target triggers intelligent
rules.
Track time
It is to set the time of track time.
Record
Check it and so when alarm occurs, system will auto record. You shall set
record period of alarm in “Storage>Schedule” and select auto record in
record control interface.
Record delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay out
Check it to enable alarm activation output port, it can activate
corresponding alarm output device when alarm occurs.
Alarm delay
It means the alarm delays a period of time to stop after alarm ends, the unit
is second, and the value ranges from 10s to 300s.
Send Email
Check it and the system can send out email to inform users when alarm
occurs. User can set email address in “Network>SMTP (email)”.
PTZ
Here you can set PTZ movement when alarm occurs. Such as go to preset
x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot
Check it and the system can realize alarm snapshot automatically when
alarm occurs, meanwhile it needs to set snapshot period of alarm in “
Storage>Schedule”.
Target filter
Check some intelligent rule, click “Draw Target”, then you can draw the
model of filter target according to the rule in the scene. Click “Clear” to
delete all the target filter models which have been drawn.
Table 4-26
Step 4
Click “Save” to complete config.
4.4.4.1.2 Intrusion
Intrusion includes cross area and in area functions.
Crossing area means that it will trigger alarm when target entering or leaving area.
Loading ...
Loading ...
Loading ...