Loading ...
Loading ...
Loading ...
124
Click “Save” and the system will prompt “Successfully Saved’, then snapshot schedule is completed.
4.5.1.3 Holiday Schedule
Holiday schedule can set specific date as holiday.
Step 1
Select “Setup > Storage > Schedule > Holiday Schedule”.
The system will display the interface of “Holiday Schedule”, which is shown in Figure 4-103.
Figure 4-103
Step 2
Select date to set as holiday. The selected date will be highlighted in yellow.
Step 3
Check “Record/Snapshot”, click “Save”. System prompts it is successfully saved.
Step 4
Check “Record Schedule/Snapshot Schedule” interface, click setup next to “Holiday”, and refer to setup
of “Monday to Sunday”.
Step 5
Complete setup of “Holiday”, then it records/snapshots according to date set in holiday schedule.
4.5.2 Destination
4.5.2.1 Path
Path can configure storage path of device record and snapshot. There are three options: Local, FTP
and NAS. You can only select one mode. System can save according to the event types. It is
corresponding to the three modes (general/motion/alarm) in the schedule interface. Please check the
box to enable the save functions.
Note: Only some devices support NAS storage, please refer to the actual device.
Step 1
Loading ...
Loading ...
Loading ...