Loading ...
Loading ...
Loading ...
126
Figure 4-105
Click “Read only” to set the SD card as read only.
Click “Read & Write” to set the SD card as read & write.
Click “Hot Swap” to realize hot swap upon the SD card.
Click “Format” to realize formatting upon the SD card.
4.5.2.3 FTP
You need to check the box to enable the FTP function. When network disconnect occurred or there is
malfunction, emergency storage can save the record/snapshot to the local SD card.
Step 1
Select “Setup > Storage > Destination > FTP”, the system will display the interface of “FTP” shown in
Figure 4-106.
Figure 4-106
Step 2
Configure info of each parameter according to the actual needs; please refer to Table 4-35 for more
details.
Loading ...
Loading ...
Loading ...