Loading ...
Loading ...
Loading ...
40
Laser Light
Laser light makes compensation for the ambient environment when it is used for long-distance
monitoring.
The config steps of laser light are shown as follows:
Step 1
Select “Setup > Camera > Conditions > IR Light” and the system will display the interface of “IR Light”,
which is shown in Figure 4-14.
Figure 4-14
Step 2
Configure parameter info according to actual needs; please refer to Table 4-6 for more details.
Parameter
Note
Mode
It is used to set the mode of laser light, it can select Zoomprio or manual, it
is “Zoomprio” by default.
Zoomprio: The camera can auto adjust laser light brightness according
to the zoom rate of light.
Manual: It is manually to set laser light brightness and angle value
scattered by light beam.
Laser Intensity
It is to set the intensity of laser light, the value range is from 0 to 100.
Laser Angle
It is to set the angle scattered by light beam, the value range is from 0 to
100.
Table 4-6
Step 3
Click “Save” to complete config.
4.1.1.8 Defog
Note
It fails to set defog function after enabling “Backlight” function, there will be prompt on the WEB interface.
Loading ...
Loading ...
Loading ...