Loading ...
Loading ...
Loading ...
16
Parameter
Function
Scan
Select Scan from the dropdown list, click Start button, you can begin
scan operation. Default SN is 1.
Preset
Input the preset value and then click View button, the camera turns
to the corresponding position of the preset.
Tour
Select Tour from the dropdown list and then click Start button, you
can begin tour.
Pattern
You can select Pattern from the dropdown list and then click Start
button to begin PTZ movement.
Assistant
Reserve extended function, it can support special requirements.
Note
It is recommended to enable the function with the guidance of
professional staff if necessary; otherwise it may cause some
unexpected problems.
Pan
Select Pan from the dropdown list and then click “Start” button and it
can realize horizontal rotation of the PTZ.
Wiper
Select wiper, click “Open” to enable wiper function; click “Close” to
disable wiper function.
Go to
It is the accurate positioning function. Please input
corresponding horizontal angle, vertical angle and zoom speed
and then click “Go to” button to go to a specified position.
One unit of the horizontal angle or vertical angle stands for 0.1
degree.
Table 2-7
Menu
The menu interface is shown in Figure 2-13; please refer to Table 2-8 for more details about parameters.
Figure 2-13
Parameter
Note
Direction button
Up and down buttons are used to select parameters, left and right buttons
are used to select parameter value.
Loading ...
Loading ...
Loading ...