Loading ...
Loading ...
Loading ...
28
4 Setup
You need to set the camera, video and audio conditions of the network intelligent speed dome in order
to guarantee normal monitoring of the device.
4.1 Camera
4.1.1 Conditions
4.1.1.1 Image
Step 1
Select “Setup > Camera > Conditions > Image”. The system displays the interface of “Image” which is
shown in Figure 4-1.
Figure 4-1
Step 2
Configure parameter info according to the actual needs; see Table 4-1 for more details.
Parameter
Note
Style
It is to set the image display style; you can select soft, standard or vivid. It is
standard by default.
Note: the function is only supported by some models.
Brightness
It is to set the overall brightness of image, the bigger the value is, the
brighter the image becomes. The value ranges from 0 to 100.
Contrast
It is to set the image contrast, the bigger the value is, the bigger the image
bright contrast becomes. The value range is from 0 to 100.
Saturation
It is to set the image color purity, the higher the purity is, the brighter it
becomes, the lower the purity is, the darker it becomes. The range is from 0
to 100.
Chroma CNT
It is to set the suppression level upon the image color, the bigger the value
is, the more obvious the suppression becomes. The value range is from 0 to
100.
Loading ...
Loading ...
Loading ...