Loading ...
Loading ...
Loading ...
67
Parameter
Function
Sender
Sender email address.
Authentication
(Encryption
mode)
You can select SSL, TLS or none.
Title
Email title, and it can be customized.
Attachment
System can send out the email of the snapshot picture once
you check the box here.
Mail receiver
Input receiver email address here. Max three addresses.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection or
the abnormity event activates the email, system sends out the
email according to the interval you specified here. This
function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Health mail
enable
Please check the box here to enable this function.
Email test
The system will automatically sent out an email once to test
the connection is OK or not .Before the email test, please
save the email setup information.
Table 4-17
4.2.7 UPnP
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable
UPnP function.
Enable UPnP, network cameras support UPnP protocol. In Windows Xp or Windows Vista system, if
system UPnP is enabled, then the network camera can auto search it in the network neighborhood of
Windows.
Please refer to the following steps to install UPnP network service in the Windows system:
Step 1
Open control panel, and select “Add or Remove Programs”.
Step 2
Click the “Add/Remove Windows Components”
Step 3
Select the “Network Services” from the Windows Components Wizard. Click the Details button
Step 4
Loading ...
Loading ...
Loading ...