Loading ...
Loading ...
Loading ...
141
You can select default mode according to the actual needs.
Default: Config (except network IP address, user management info and so on) default.
Factory default: The function is equivalent to the reset button of the speed dome. It can help to
restore all the config info to factory default, the device IP address will be restored to default IP
address as well. After clicking “Factory Default”, it needs to input the password of admin user on
the interface. It can restore the device after the system judges that the password is correct.
4.6.6 Import/Export
It can realize quick config of several devices via configuring file import and export when the config
method of several devices is the same.
Step 1
Select “Setup > System > Import Export” on the WEB end of some device.
The system will display the interface of “Import & Export”, which is shown in Figure 4-124.
Figure 4-124
Step 2
Click “Export” to export the config file (.backup file) to local.
Step 3
Click “Import” on the “Import & Export” interface of the WEB end of the device to be configured, and
import the file into the system. So far the device config is completed.
4.6.7 Auto Maintenance
Users can set auto reboot system or auto delete file, it needs to set period and time for auto reboot
system, it is 02:00 every Tuesday by default. It needs to set the period of the file if it needs to auto
delete old files, and delete the file within the specific period.
Step 1
Loading ...
Loading ...
Loading ...