Loading ...
Loading ...
Loading ...
35
The system displays the interface of “Day & Night” mode, which is shown in Figure 4-9.
Figure 4-9
Step 2
Configure parameter info according to the actual needs; refer to Table 4-3 for more details.
Parameter
Note
Type
Day/night switch mode can select electrical and ICR, it is ICR by default.
ICR: Mechanical day/night switch uses filter for day & night switch.
Electrical: It uses image processing mode for day & night switch.
Mode
It is to set image color and b/w mode, which is not influenced by the
selection of config profile. It is auto mode by default.
Color：The camera will only output color image.
Auto：It can select to output color or black & white image according to
the environment adaptation.
Black & White：The camera will only output black & white image.
Sensitivity
It is used to adjust the sensitivity of switch between color and black & white.
It can select high, middle and low, it is middle by default.
Note
It can set sensitivity only when day/night mode is auto.
Delay
It is used to adjust the delay value of switch between color and black &
white. The value range is 2s～10s.
Note
It can set delay only when the day/night mode is auto.
Table 4-3
Step 3
Click “Save” to complete config.
Loading ...
Loading ...
Loading ...