Loading ...
Loading ...
Loading ...
61
Step 2
Check “Enable” and input PPPoE username and password.
Step 3
Click “Save” to complete PPPoE config.
The system will prompt that it has been successfully saved and real-time display the acquired IP
address of WAN, which is shown in Figure 4-37, users can visit the device via the IP address.
Figure 4-37
4.2.4 DDNS
DDNS (Dynamic Domain Name Server) can be used to update the relationship between domain name
on the DNS server and IP address dynamically in the situation where the device IP address changes
frequently, which is to guarantee the users to visit device via domain name.
Note
Please confirm if the device supports the type of DNS before config and log in the website of DDNS
service provider to register domain name and other info.
If DDNS type is Dahua DDNS, then it doesn’t need to register domain name.
If DDNS type is other type, then it needs to log in corresponding DDNS website to register username,
password, domain name and etc.
Users can check info of all the connected devices after they successfully registered in DDNS
website and logged in.
Step 1
Select “Setup > Network > DDNS”.
The system will display the interface of “DDNS”, which is shown in Figure 4-38.
Loading ...
Loading ...
Loading ...