Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/99770436-sdzw2000t-sl/bg4c.png)
68
Check the “Internet Gateway Device Discovery and Control client” and “UPnP User Interface”. Please
click OK to begin installation.
The operation steps of UPnP config is shown as follows:
Step 1
Select “Setup > Network > UPnP”.
The system will display the interface of “UPnP”, which is shown in Figure 4-42.
Figure 4-42
Step 2
Check the box and enable UPnP function.
Step 3
Selection mode
There are two mapping modes for UPnP which are auto and manual. As for manual mapping mode, it
allows users to modify external port; as for auto mapping mode, it completes port mapping automatically
without occupying the port, and users don’t need to modify mapping.
Step 4
Click “Save” to make config valid.
4.2.8 SNMP
The SNMP (Simple Network Management Protocol) provides framework of bottom-layer network
management for network management system. It can control SNMP function in the network service
setting. It can gain the relevant config info after connecting to device via relevant software tool. It needs
to satisfy the following conditions if it is to use SNMP function:
Install SNMP device monitoring and management tool, such as MIB Builder and MG-SOFT MIB
Browser.
Get two MIB documents which are corresponding to the current version from technical personnel.
Step 1
Loading ...
Loading ...
Loading ...