Loading ...
Loading ...
Loading ...
117
Figure 4-92
Step 2
Configure info of each parameter according to the actual needs; refer to Table 4-30 for more details.
Parameter
Function
Enable
After enabled, relay activation will work.
Relay-in
Select relay-in, it can select 7-channel relay in.
Sensor type
There are two options: NO/NC. Switch from NO to NC means
enabling alarm; Switch from NC to NO means disabling alarm.
Table 4-30
Note
Please refer to “4.4.1.1 Motion Detection” for description of other parameters.
Step 3
Click “Save” to complete config.
4.4.8 Abnormity
Abnormality includes six alarm events which are no SD card, capacity warning, SD card error,
disconnection, IP conflict and illegal access.
4.4.8.1 SD Card
Step 1
Select “Setup > Event > Abnormity > SD Card”.
The system will display the interface of “SD Card”, which is shown from Figure 4-93 to Figure 4-95.
Loading ...
Loading ...
Loading ...