Loading ...
Loading ...
Loading ...
128
Parameter
Note
Enable NAS
Click it to enable NAS function.
Server Address
NAS server address.
Remote
Directory
Store it to the directory of the NAS server.
Table 4-36
Step 3
Click “Save” to complete config.
4.5.3 Record control
Step 1
Select “Setup > Storage > Record Control”, the system will display the interface of “record Control”
shown in Figure 4-108.
Figure 4-108
Step 2
Configure info of each parameter according to the actual needs; please refer to the following sheet for
more details.
Parameter
Function
Pack
Duration
It is to set the pack duration of each record file; it is 30 mins by
default.
Pre-event
Record
It is to set pre-event record time.
For example, when it inputs 5, then the system will read the record
video of first 5 seconds of the internal storage and record it into the
file.
Note
Configure pre-event record time, when alarm record or motion
detection record occurs, if there is no record, system will record the
preceding n seconds video data into the record file.
Loading ...
Loading ...
Loading ...