Loading ...
Loading ...
Loading ...
54
Sampling
frequency
It includes 8k, 16k, 32k, 48k and 64k. It is 16K by default.
Audio in type
It is to set audio input type, it is LineIn by default.
Noise filter
It is to set if it is to enable noise filter function, it is enabled by
default.
Microphone
volume
It is to adjust the volume of the microphone; the value range is
from 0 to 100.
Note
The function is only supported by some models.
Speaker volume
It is to adjust the volume of the speaker; the value range is from
0 to 100.
Note
The function is only supported by some models.
Table 4-11
Step 3
Click “Save” to complete config.
4.2 Network
4.2.1 TCP/IP
4.2.1.1 TCP/IP
You need to configure the IP address and DNS server of the intelligent speed dome, make sure it can
be mutually connected to other devices in the networking.
Note
Please confirm the intelligent speed dome has connected to network correctly before setting network
parameters.
Please distribute IP address of the same network segment if there is no router in the network.
It needs to set corresponding gateway and subnet mask if there is no router in the network.
Step 1
Select “Setup > Network > TCP/IP”.
The system displays the interface of “TCP/IP”, which is shown in Figure 4-32.
Loading ...
Loading ...
Loading ...