Loading ...
Loading ...
Loading ...
46
4.1.2.2 Snapshot
It is to set the stream info of snapshot. The config steps are shown as follows:
Step 1
Select “Setup > Camera > Video > Snapshot” and the system will display the interface of “Snapshot”,
which is shown in Figure 4-21.
Figure 4-21
Step 2
Configure parameter info according to the actual needs; please refer to Table 4-9 for more details.
Parameter
Function
Snapshot type
It includes General and Event.
Image size
It is the same with the resolution of snapshot (main stream or
sub stream).
Quality
It is to set the image quality. There are six levels from 1 to 6.
Interval
It is to set snapshot frequency. The value ranges from 1s to 7s
or customized.
Table 4-9
Step 3
Click “Save” to make config valid.
4.1.2.3 Video Overlay
It is to set the info which is to be overlaid on the monitoring image. The config steps are shown as
follows:
Step 1
Select “Setup > Camera > Video > overlay” and the system will display the interface of “Overlay”.
Step 2
It is to configure video overlay info according to actual needs. The config interface is shown from Figure
4-22 to Figure 4-28. Refer to Table 4-10 for more details.
Loading ...
Loading ...
Loading ...