Loading ...
Loading ...
Loading ...
107
Step 2
Select the preset which needs to be configured with intelligent rules.
Figure 4-84
Step 3
Click
to add intelligent rules.
Note
Double click “Rule Type” to modify the type of rules.
Enter rule config interface, the lock function is enabled automatically, the locking time is 180s,
during this period, other control modes are invalid except manual control over the speed dome. You
can click “Unlock” to unlock it.
Step 4
Click “Save” to complete config.
4.4.4.1.1 Tripwire
It will trigger alarm when the target crosses the warning line according to the set movement direction.
It needs some time and space to confirm the target after it appears, so it needs to leave some space on
both sides of the warning line when setting warning line, please don’t set it near the obstacle.
Application scene: it can only be applied to the scene where the target is sparse and it is basically
blocked between targets, such as the perimeter protection area without security guard.
The config steps are shown as follows:
Step 1
Select rule type as “Tripwire” and the config interface is shown in Figure 4-85.
Loading ...
Loading ...
Loading ...