Loading ...
Loading ...
Loading ...
71
4.2.9 Bonjour
Bonjour, known as zero config networking, can auto discover the PC, device and service on the IP
network. Bonjour uses the IP protocol with industrial standard to allow the device to discover each other
automatically without inputting IP address or configuring DNS server.
After Bonjour function is enabled, the network cameras will be auto detected in the operating system
and client which support Bonjour. When the network camera is auto detected by Bonjour, it will display
the “Server Name” which is configured by users.
Step 1
Select “Setup > Network > Bonjour”.
The system will display the interface of “Bonjour”, which is shown in Figure 4-45.
Figure 4-45
Step 2
Check “Enable” to set server name.
Step 3
Click “Save” to make config valid.
In the operating system and client which support Bonjour, it can visit network camera WEN interface via
Safari browser, the steps are as follows:
Step 1
Click Safari browser “Display All Bookmarks”.
Step 2
Open “Bonjour”, and it can auto detect the network camera which enables Bonjour function in the LAN.
Step 3
Click it to visit corresponding WEB page.
4.2.10 Multicast
Loading ...
Loading ...
Loading ...