Loading ...
Loading ...
Loading ...
ioubleshooting
PROBLEM
Burners spark
Cooling fan
runs during
BAKE, BROIL,
or CLEAN
The convection
fan does not
run all the time
POSSIBLE CAUSE WHAT TO DO
It is normal for all four
burners to spark when a
burner is turned on, but has
not yet ignited.
No action is needed. Burner
operation is not affected and the
sparking should end when the knob
is moved from LITE.
Continuous sparking may be
caused when:
--A spillover has wet ignition
switch contacts.
--There is a faulty spark
module.
--The wall outlet wiring is
incorrect.
It is normal for the fan to
automatically run while the
oven is in use to cool the
electronic control.
Turn on one or two burners or
disconnect electrical supply to let
switch dry out.
Contact service technician to
replace module.
Contact a qualified electrician to
correct wiring, if needed.
It is normal for the convec-
tion fan to cycle on and off
during the CONVECTION
BROIL mode. The timer dis-
play shows the fan running
continuously.
No action is needed.
The control You are not pushing in Push control knob(s) in before
knob(s) will not before turning, turning to a setting.
turn
The Self- You have programmed a Wait for the start time to be reached,
Cleaning cycle delayed start time. or cancel and reset the control.
will not operate
The cooling fan is not
running. If fan is running, you
can hear it.
Call a service technician to repair.
Odor from Heating of insulation. Odors are normal when the range is
oven new. The odors will disappear as the
oven is used.
Moisture in It is normal for moisture to This moisture will evaporate during
door glass appear in the door glass as oven usage.
the oven heats up.
continued on next page
61
Loading ...
Loading ...
Loading ...