Loading ...
Loading ...
Loading ...
Thissectionisdesignedto helpyousavethecostofaservicecall.Itoutlinespossibleprob-
lems,theircauses,andactionsyoucantaketosolveeachproblem,tf youstillneedassis-
tanceorservice,callourConsumerAssistanceCenter(intheU.S.A.,seepage64;in
Canada,seepage65)for helporcallingforservice.Pleaseprovidea detaileddescriptionof
theproblem,yourappliance'scompletemodelandserialnumbers,andthepurchaseor
installationdate.(Seethe"A NotetoYou"section.)Thisinformationwillhelpusrespond
properlytoyourrequest.
PROBLEM POSSIBLECAUSE WHATTODO
Nothingwill
operate
The oven will
not operate
Burner fails to
light
The unit is not plugged in or
wired into a live circuit with
proper voltage.
A household fuse has blown
or a circuit breaker has
tripped.
The unit is not properly
connected to gas supply.
You have not set the
electronic control correctly.
You have programmed a
delayed start time.
The unit is not plugged in or
wired into a live circuit or cir-
cuit with proper voltage.
Plug unit into a properly grounded
outlet. Wire the unit into a live circuit
with proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
Contact a designated servicing
outlet to reconnect range.
Refer to the section in this manual
describing the function you are
operating.
Wait for the start time to be reached
or cancel and reset the controls.
Plug unit into a properly grounded
outlet. Wire the unit into a live circuit
with proper voltage. (See installation
instructions.)
A household fuse has blown
or a circuit breaker has
tripped.
Replace household fuse or reset
circuit breaker.
The burner ports are clogged. Clean with a straight pin. (See
page 13.)
Burner flames
are uneven
Burner flames
lift off ports, are
yellow, or are
noisy when
turned off.
The burner ports are clogged.
The burner cap is not in
position.
The air/gas mixture is
incorrect.
Clean with a straight pin. (See
page 13.) tf this fails, call for service.
Make sure the burner cap is properly
seated on the burner head.
Follow instructions on page 14
"Adjusting the height of top burner
flame." If this does not work, call
service technician to check mixture.
Burner makes The burner is wet from Let dry.
popping noises washing.
when on
60
Loading ...
Loading ...
Loading ...