Loading ...
Loading ...
Loading ...
3.
Take the picture.
When focus is achieved and you press the shutter button completely,
the flash will fire at all times.
To retract the built-in flash after shooting, push it down with your fingers
until it clicks into place.
Shooting tips
In bright light, decrease the ISO speed.
If the exposure setting in the viewfinder blinks, decrease the ISO speed.
Detach the lens hood. Do not get too close to the subject.
If the lens has a hood attached or you are too close to the subject, the bottom of the
picture may look dark due to the obstructed flash light. For important shots, play back
the image and check to make sure the picture does not look unnaturally dark at the
bottom part.
Shutter Speed and Aperture Value in Flash Photography
Shooting Mode Shutter Speed Aperture Value
Auto (1/200–30 sec.)* Automatically set
Manual (1/200–30 sec.) Automatically set
Auto (1/200–30 sec.)* Manually set
Manual (1/200–30 sec., Bulb) Manually set
* With [Slow synchro] in [
: Flash control] set to [1/200-30sec. auto]
Caution
Do not use the built-in flash unless it is fully raised.
172
Loading ...
Loading ...
Loading ...