Loading ...
Loading ...
Loading ...
CHECKING CABINET FOR SQUARENESS
TOOLS NEEDED: Framing square, 3/4" wrench and
7/16" wrench or socket.
1. With cabinet on back side place a square on
lower shelf next to right side panel. Adjust stand
so both right side panel and lower shelf touch
square (as illustrated). Then tighten nut holding
rear of shelf to side panel and right side spacer to
front of lower shelf. Repeat procedure for left
side.
ii
2. Place square at top side of cabinet and adjust
stand so square touches both skirt and side
panel (as illustrated). Then tighten right side of
front and rear skirts to side panel. Repeat pro-
cedure for left side.
WARNING: TO AVOID INJURY FROM UNEXPECT-
ED SAW OR WORK MOVEMENT, LEVELING FEET
MUST BE ADJUSTED SO THAT SAW DOES NOT
ROCK. TO AVOID UNEXPECTED CARRIAGE MOVE-
MENT, ADJUST LEVELING FEET SO THAT THE
ARM SLOPES SLIGHTLY DOWNWARD TO THE
REAR.
3. Lift the cabinet upright onto the casters and
move to desired location. Press down on the foot
actuator pedal and lock leveling feet in "down"
position. With a 3/4 open end wrench loosen
1/2-13 hex nut. Adjust leveling feet by rotating
counterclockwise until foot lifts the front caster
off the floor - tighten 1/2-13 hex nut.
FOOT ACTUATOR
HEX NUT
LEVELING FOOT
MODEL 113.198610
16
Loading ...
Loading ...
Loading ...