Loading ...
Loading ...
Loading ...
CASTER/FOOT ASSEMBLY NO. 50753____8
A R.H. Foot Assembly ......................... 1
B L.H. Foot Assembly ......................... 1
C Caster ..................................... 4
Loose Parts Bag No. 50752___2contains the following:
D Slotted Truss Head Bolt 1/4-20 x 7/16 ....... 20
E Truss Head Bolt 1/4-20 x 1 .................. 2
F Hex Nut 1/4-20 ............................ 18
F Hex Nut 1/2-13 ............................. 2
G Lockwasher 1/4 ............................ 18
H Spacer ..................................... 2
I Foot-Leveling .............................. 2
2. After layout of stand parts, take the lower shelf
and turn upside down on floor. Small front flange
should be pointing upward.
3. Place one shelf stiffener against front flange of
shelf as shown.
4. Place the under support on the shelf. Locate two
(2) 1/4-20 x 1/2 truss head bolts, Iockwashers
and hex nuts from loose parts bag #488. Attach
the supports to the shelf in holes as illustrated
and tighten nuts with 7/16" wrench or socket.
E_
5. Locate lower support and assemble lower sup-
port, shelf and under shelf support with four (4)
1/4-20 x 1/2 truss head bolts, Iockwashers, and
hex nuts.
6. Attach the second shelf stiffener to the under
support. Use two (2) 1/4-20 x 1/2 truss head
bolts, Iockwashers, and hex nuts to fasten to the
under support with 7/16" wrench or socket.
i
7. Locate the four (4) corner brackets and use eight
(8) 1/4-20 x 1/2 truss head bolts, Iockwashers
and hex nuts to mount the corner brackets to the
shelf AS ILLUSTRATED. Tighten the nuts with a
7/16" wrench or socket.
13
Loading ...
Loading ...
Loading ...