Loading ...
Loading ...
Loading ...
EN
82
APERTURE PRIORITY - A
Aperture priority mode sets the exposure automatically according
to the manually selected aperture. This mode is suitable for
pictures in which the depth of field is a critical compositional
element.
By selecting an appropriately low aperture value, you can reduce
the depth of field range, for example to make a face “stand out” in
sharp focus against an unimportant or distracting background.
Conversely, you can use a higher aperture value to increase the
depth of field range, so that everything from the foreground to the
background will be in full focus in a landscape shot.
Select the operating mode A (see p. 75)
Select the desired aperture value via the right setting wheel
• The set aperture value is displayed in orange, the automatical-
ly calculated shutter speed in white.
Tap and hold the shutter button
Shutter release
Notes
• The remaining exposure time after shutter release is counted
down in seconds on the display for shutter speeds greater than
2s.
• Image noise becomes apparent when using higher sensitivities,
particularly on uniform dark areas. In order to reduce this
annoying phenomenon, the camera will take a second “black
picture” (taken with the shutter closed) automatically after
pictures taken with slow shutter speeds and high ISO values. The
noise metered in this parallel picture is then digitally “subtract-
ed” from the data for the actual picture. Where that is the case,
the message Noise reduction 12s (time example) will appear on the
LCD panel. The doubling of the “exposure” time must be taken
into account for long exposure times. The camera must not be
switched off during that time.
Picture Mode
Loading ...
Loading ...
Loading ...