Loading ...
Loading ...
Loading ...
EN
137
The LCD panel is to dark or too bright/not clear The brightness setting is incorrect Adjust the display brightness
FavoritesFavorites menu does not appear
The favorites menu is empty Add at least one function
Live View stops suddenly or doesn't start The camera is hot due to high ambient temperature,
extended Live View operation, extended video
recording or serial exposures
Allow camera to cool down
The brightness in Live View mode is not the same
as in the pictures
The brightness settings for the LCD panel have no
influence over the exposures
Adjust the brightness settings as needed
The number of remaining exposures does not count
down after a picture is taken
The exposure requires only very little memory space This is not a fault; the number of remaining exposures
is calculated as approximations
Taking pictures
The camera won’t take a picture/shutter button is
deactivated
Memory card is full Replace the memory card
The memory card is not formated Reformat the memory card
(Caution: Loss of data!)
The memory card is write protected Deactivate the write protection on the memory card
(small lever on the side of the memory card)
Dirt on the memory card contacts Clean the contacts with a soft cotton or linen cloth
The memory card is damaged Replace the memory card
The sensor is overheating Allow camera to cool down
The camera has switched off automatically (automatic
shutdown)
Switch the camera on again
deactivate auto shutdown as needed
Picture data is being written to the memory card and
the cache is full
Wait
Noise reduction function is working (e.g. after night
photography with long exposure times)
Wait or deactivate noise reduction
Battery is depleted Charge or replace the battery
Camera is processing a picture Wait
No picture is taken The camera is connected to the Leica FOTOS app End connection and reconnect
Image noise appears on the LCD panel/in the
viewfinder when the shutter button is pressed to the
first pressure point
The gain is increased to aid image composition if the
object is insufficiently lit with reduced aperture opening
Not a fault – picture quality will not be impacted
LCD panel/viewfinder deactivates after a very short
time
Power Save settings are activated Change the settings as needed
FAQ
Loading ...
Loading ...
Loading ...