Loading ...
Loading ...
Loading ...
CLEANING DOWNDRAFT VENTILATION
CONTROL MODULE
• Use a spray degreaser to remove fingerprints and greasy spatters. Spray cleaner on a cloth and wipe the surface.
Do not spray directly on the control module.
• Use a clean cloth or sponge and wipe the surface with warm water and a mild detergent. Rinse and dry immediately.
• Be careful not to soak the control module. Although the module is sealed, excessive moisture may cause damage to the controls.
FILTER CARE
• The aluminum mesh filters should be cleaned approximately once a month or every 30 uses.
The FILTER indicator on your control module will illuminate when it is time to clean the filters.
• To remove the filters, push down on the filter frame while pulling the filter out and away from the downdraft .
• The filters and filter covers are dishwasher-safe (preferably at a temperature of approximately 140°F)
and are designed to fit most dishwashers. They may also be hand-washed.
• After washing, when filters are dry, reinstall using the reverse procedure.
• Do not operate the downdraft without filters. This may damage the blower or other internal components.
PRO VENTILATION
USING PRO VENTILATION
HEAT SENTRY
When the heat sentry feature detects heat it turns the ventilation hood on and adjusts the blower speed automatically. The heat sentry
feature activates when the exhaust temperature from the hood reaches 200°F and deactivates when the exhaust temperature decreases
to 186°F.
LED LIGHTING
A suction-cup light bulb changer is provided with all pro ventilation hoods to help you remove and replace the halogen light bulbs.
CLEANING PRO VENTILATION:
FILTERS
To remove filters, press upward then rotate bottom outward. To aide in removal, remove center filter first. Remove grease cups from bottom
edge of hood (not included with pro hood liners). Gloves should be worn when handling filters. Reinstall using the reverse procedure. Outer
filters may need to be pushed over while the center filter is installed. Filters are dishwasher safe and are designed to fit most dishwashers.
Wipe filters and grease cups (if applicable) to remove excess grease before placing in the dishwasher.
STAINLESS STEEL
Use a non-abrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural luster, lightly wipe surface with a
water-dampened microfiber cloth followed by a dry polishing chamois. Always follow the grain of stainless steel.
!
Loading ...
Loading ...
Loading ...