Loading ...
Loading ...
Loading ...
TEMPERATURE PROBE (E SERIES)
• Preheat oven to desired temperature in desired mode.
• When the oven signals that preheat is complete, place meat on rack and insert probe into the thickest part of the meat.
• Use dry pot holder to lift the probe sensor cover on the oven wall and slide probe connector into the receptacle
• With the door closed, touch PROBE then use number pad to program desired internal temperature.
• Touch ENTER; the probe will read LO until it registers over 100°F. Once above 100°F
the display will show the temperature as the food approaches doneness.
• The display will alternate between the probe temperature and the oven temperature.
• When the desired internal temperature is reached, three chimes will signal doneness.
• Probe and probe sensor cover become very hot. Handle with a dry potholder.
USING THE TEMPERATURE PROBE FOR BREADS
Use the instructions listed above for meats but bake bread for 10 minutes without the probe before
inserting probe into thickest part of bread.
CARE RECOMMENDATIONS
STAINLESS STEEL
Use a non-abrasive stainless steel cleaner and apply with a soft lint-free cloth. To bring out the natural luster, lightly wipe surface with a
water-dampened microfiber cloth followed by a dry polishing chamois. Always follow the grain of stainless steel.
CONTROL PANEL
Use spray degreaser to remove fingerprints and food soil. Spray on a cloth before wiping panel.
BLACK GLASS
Spray glass cleaner on a cloth to clean.
OVEN INTERIOR
Before using self-clean feature, use a razor blade to gently lift baked on foods from oven cavity and window. For stubborn stains, spray
with a mild abrasive cleaner or spray degreaser and scrub with a no-scratch Scotch-Brite™ pad. Wash entire oven cavity with soap and
water to remove all cleaning chemicals before entering self-clean mode. After the self-clean cycle, allow oven to cool and wipe out ash
with a damp cloth.
OVEN RACK GUIDES
Remove and place on a flat surface near the sink. Clean with hot water and mild detergent or paste of baking soda and water.
Do not immerse in water. Towel dry.
OVEN LIGHT COVER
When the oven is cool, remove the oven racks and guides. Remove the light cover by gently prying the bottom edge with a flat
screwdriver. Clean with a mild abrasive cleaner. The existing bulb can be replaced with a 20-watt halogen bulb.
BROILER PAN
To clean the upper rack, use mild detergent and a scouring pad. Rinse and dry. To clean the bottom pan, discard grease and wash
with hot water and mild detergent. Rinse and dry.
1
2
3
4
5
6
7
CLEANING COOKING GUIDE OVENS STEAM OVENS COFFEE SYSTEM RANGES COOKTOPS MODULES WARMING DRAWER MICROWAVE OVENS VENTILATION OUTDOOR GRILLS
!
Loading ...
Loading ...
Loading ...