Loading ...
Loading ...
Loading ...
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
Getting Ready
25
1
Assembling the Spool Stand
a
Hold in the tabs on the spool stand and
remove the lid.
a Tabs
b
Raise the telescopic thread guide shaft and
the two spool pins.
a Spool pins
b Telescopic thread guide shaft
c
Fully extend the telescopic thread guide
shaft until the two internal stoppers snap
into place.
d
Turn the thread guide counterclockwise.
e
Open the upper cover of the machine, and
then place the spool stand on the upper
cover with the notches in the spool stand
aligned with the tabs on the upper cover.
a
a
b
a
Note
• Make sure that the spool stand is firmly
secured. Otherwise, the spool stand may
fall during sewing.
• Do not place any object weighing 1 kg or
more on the top cover. The weight of the
spool stand with its lid removed is about
280 g.
Memo
• For details on winding the bobbin using the
spool stand, refer to page 56.
• For details on upper threading using the
spool stand, refer to page 66.
Loading ...
Loading ...
Loading ...