Loading ...
Loading ...
Loading ...
NAMES OF MACHINE PARTS AND THEIR FUNCTIONS
24
Using the Multi-purpose
Screwdriver
Since the screwdriver can be changed to three
different positions, it can be extremely useful for
the various machine preparations. With this
machine, position “1” and position “3” are used.
■ Position “1”
You can install/remove the presser foot holder,
needle clamp screw.
■ Position “3”
The multi-purpose screwdriver can be positioned
over the screw on the embroidery frame to tighten
the screw after hooping the fabric or when removing
the fabric.
Using the Spool Stand
The included spool stand is useful when using
thread spools with a large diameter (cross-wound
thread). The spool stand can hold two spools of
thread.
* No.2 to No.6 are included in a plastic bag.
■ Warning label
This product contains magnets.
a Be careful not to pinch your fingers or any objects
between the spool stand and the upper cover of
the machine.
b Be sure to keep the magnets away from precision
electronics, computer disks, credit cards with a
magnetic stripe, etc.
c Do not use the spool stand if you have a
pacemaker.
Note
• When rotating the multi-purpose
screwdriver, do not forcefully rotate it in the
direction that it does not rotate; otherwise, it
may break.
123
456
No. Part Name Part Code
1 Spool stand XH1606-001
2 Spool cap (XL) × 2 XE0779-001
3 Spool holder × 2 XA0679-050
4 Spool cap base × 2 XE0780-001
5 Spool felt × 2 XC7134-051
6 Ring × 4 026030-136
CAUTION
• Do not lift the handle of the machine while the
spool stand is installed.
• Do not push or pull the telescopic thread
guide or spool pins with extreme force,
otherwise damage may result.
• Do not place any object other than spools of
thread on the spool support.
• Do not try to wind thread on the bobbin while
sewing using the spool stand.
Loading ...
Loading ...
Loading ...