Loading ...
Loading ...
Loading ...
ERROR MESSAGES
213
Appendix
6
If the machine is not properly set and the “Start/Stop” button or the “Reverse/Reinforcement Stitch” button
is pressed, or if the operation procedure is incorrect, the machine does not start. An alarm sounds and an
error message is displayed on the LCD. If an error message displays, follow the instructions in the
message.
Below is an explanation of error messages. Refer to these when necessary (if you press or do the
operation correctly while the error message is displayed, the message disappears).
ERROR MESSAGES
CAUTION
• Be sure to rethread the machine. If you press the “Start/Stop” button without rethreading the machine,
the thread tension may be wrong or the needle may break and cause injury.
This message is displayed
when the motor locks due
to tangled thread or for
other reasons related to
thread delivery.
This message is displayed
when you try to sew with a
stitch other than a middle
needle position stitch while
the single-hole needle plate
is installed.
This message is displayed
when the needle plate is
removed with the machine
on or when the machine is
turned on and embroidery
or embroidery edit mode is
selected.
This message is displayed
when the machine needs to
be maintained. (page 200)
This message is displayed
when you try to combine
more than 71 stitch
patterns.
This message is displayed
when the speed control
lever is set to control the
zigzag stitch width, and the
“Start/ Stop” button is
pushed. Use the foot
controller to operate the
machine.
This message is displayed
when the automatic needle
threading button is pushed
while twin needle sewing is
set.
This message appears
when you try to save more
than 100 camera image or
settings screen image files
in the USB media. In this
case, delete a file from the
USB media or use different
USB media. (page 33)
This message appears
when or is
pressed to delete the
settings for a utility stitch.
To delete the selected
settings, press .
This message is displayed
when the stitch patterns
you are editing take up too
much memory, or if you are
editing too many stitch
patterns for the memory.
Loading ...
Loading ...
Loading ...