User Manual - Page 121

For INNOV-IS XP1.

Loading ...
Loading ...
Loading ...
SEWING THE STITCHES
Utility Stitches
119
3
Overcasting Using Presser Foot “J”
a
Select a stitch and attach presser foot “J”.
b
Sew with the needle dropping slightly off
the edge of the fabric.
a Needle drop position
Overcasting Using the Side Cutter
(Sold Separately)
By using the side cutter, you can do overcasting
while cutting the fabric.
a
Select a stitch.
b
Follow the steps on page 72 to remove the
presser foot.
c
Thread the needle (page 61).
Stitch Stitch name Presser foot
Overcasting stitch
Overcasting stitch
Overcasting stitch
Overcasting stitch
Single diamond overcast
Single diamond overcast
Fine adjustment of the stitching on the
fabric can be done with “L/R Shift”. Before
sewing your project, be sure to sew trial
stitches using the same conditions as in the
actual project.
For best results when sewing stretch
fabrics, decrease the pressure of the
presser foot.
a
CAUTION
Recommended stitches are noted “S” in the
lower right corner, therefore sure to only
select one of these stitches listed below. Using
another stitch may cause the needle to hit the
presser foot and break, possibly causing injury.
Thread the needle manually when using the
side cutter, or only attach the side cutter
after threading the needle using the
“Automatic Threading” button.
Stitch Stitch name Presser foot
With side cutter
With side cutter
With side cutter
With side cutter
With side cutter
Loading ...
Loading ...
Loading ...