Loading ...
Loading ...
Loading ...
ERROR MESSAGES
214
This message is displayed
when a key on the LCD
display is touched while the
needle is in the down
position.
This message is displayed
when there are too many
characters and the curved
character configuration is
impossible.
This message is displayed
when the upper thread is
broken or not threaded
correctly, and the “Start/
Stop” button or the
“Reverse/ Reinforcement
Stitch” button is pressed.
This message is displayed
when the “Presser Foot
Lifter” button is pushed
while the presser foot lever
is raised/the needle is
lowered.
This message is displayed
when the “Start/Stop”
button is pushed to sew
utility stitches or character/
decorative stitches while
the foot controller is
connected.
This message is displayed
when there is no stitch
pattern selected and the
“Start/Stop” button or the
“Reverse/Reinforcement
Stitch” button is pressed.
This message is displayed
when the bobbin thread is
running out.
This message is displayed
when the memory is full
and the stitch pattern or
embroidery pattern cannot
be saved.
This message is displayed
when, after selecting a
stitch pattern, ,
, or is pressed
and the stitch pattern is
about to be deleted.
This message is displayed
when the bobbin is being
wound, and the motor
locks because the thread is
tangled, etc.
This message is displayed
when there is a possibility
that the data for the
selected stitch pattern is
corrupted.
This message is displayed
when you try to use
incompatible media.
This message is displayed
when you attempt to select
a stitch pattern after the
USB media in which the
stitch pattern is saved has
been changed.
This message is displayed
when an error occurs with
the USB media.
This message is displayed
when the memory is full
and a stitch pattern must
be deleted.
Loading ...
Loading ...
Loading ...