Loading ...
Loading ...
Loading ...
UPGRADING YOUR MACHINE’S SOFTWARE
217
Appendix
6
You can use USB media to upgrade software for your machine.
When an upgrade program is available on “ http://s.brother/cpdab/
”, please download the files following
the instructions on the website and steps below.
Upgrade Procedure Using USB
Media
a
While pressing the “Automatic Threading”
button, turn the main power to ON.
The following screen will appear on the LCD.
b
Press or .
c
Insert the USB media into the USB port
corresponding to the button pressed in step
b . USB port on the machine. The media
device should only contain the upgrade file.
a USB media
b USB port
d
Press .
The upgrade file is loaded.
e
Remove the USB media, and turn the
machine off and on again.
UPGRADING YOUR MACHINE’S SOFTWARE
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used before starting to upgrade.
• Compatible operating systems:
Windows 7, Windows 8.1, Windows 10
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).
a
b
Note
• If an error occurs, a red text error message
will appear. When the installation is
performed successfully, following message
will appear.
Loading ...
Loading ...
Loading ...