Loading ...
Loading ...
Loading ...
OTHER BASIC PROCEDURES
89
3
■ Moving to the correct position
If the center of the embroidery frame is at the needle
drop point in the embroidering area, the embroidery
frame is correctly positioned, in other words, at the
starting position before embroidering.
If the embroidery frame is changed, the next frame
that is installed will not be correctly positioned.
For example, if the extra-large embroidery frame is
replaced with the small frame, the following will
occur.
1 Center of embroidery frame at the correct position
2 Needle position when the embroidery frame is
replaced
In order to correct the misalignment of this
embroidery frame, the embroidery frame
automatically moves to the correct position when
any of the following are performed.
• The embroidery machine is turned on.
The embroidery frame will move.
• The embroidering settings screen is displayed.
The embroidery frame will not move if it is correctly
positioned.
If the pattern extends out of the embroidering area for
the frame, a message appears, indicating that the
embroidery frame should be replaced. Either replace
the embroidery frame or return to the pattern editing
screen and move the embroidering position.
• The embroidery frame is replaced while the
embroidering settings screen or embroidering screen
is displayed, and then the key for checking the
embroidering area, for moving the embroidery
frame, or for starting embroidering is touched.
The embroidery frame will move.
Since the embroidery frame is moved to the correct
position and paused, touch the desired key again.
If the pattern extends out of the embroidering area for
the frame after the frame is moved, a message
appears, indicating that the embroidery frame should
be replaced. Either replace the embroidery frame or
return to the pattern editing screen and adjust the
pattern size or embroidering position.
When the embroidery machine is purchased, it
was adjusted so that the beginning of the stitching
was from the center of the pattern. Therefore,
move the frame and adjust the embroidering
position so that the center of the pattern aligns
with the needle drop point at the sewing position.
In addition, the angle of the entire pattern can be
adjusted if the fabric cannot be hooped evenly
within the embroidery frame and the pattern is
positioned at an angle on the fabric.
a
Touch , or in the embroidering
settings screen to select the speed.
1 Touch to move the frame by 0.1 mm.
2 Touch to move the frame by 0.5 mm.
3 Keep touching to move the frame at maximum
speed.
4 Move key
b
Touch , , , , , , and
in the embroidering settings screen.
Move the embroidery frame so that the needle drop
point is at the center of the area where you wish to
embroider.
The embroidery frame moves in the opposite
direction of the arrow.
The pattern in the pattern display area moves in the
same direction of the arrow.
Changing the
Embroidering Position
1
3
2
4
Loading ...
Loading ...
Loading ...