Loading ...
Loading ...
Loading ...
178
■ Page 3
B Reserved Needle
A specific thread color can be set to a needle bar.
The specified color remains assigned to the
needle bar specified here until the setting is
cancelled. You can also specify the maximum
sewing speed for a needle bar as well as cancel
automatic needle threading. This feature is not
accessible through the embroidering screen.
(Refer to page 120.)
■ Page 4
C Select settings for the “Eco Mode” and “Shutoff
Support Mode”. (Refer to page 185.)
D Screen Saver
Select the length of time until the screen saver
appears, and change the image of the screen
saver. (Refer to page 186.)
E Opening Screen
The machine can be set so that the opening
screen is either displayed (“ON”) or not displayed
(“OFF”) when the machine is turned on.
If you set the “Opening Screen” to “ON”, the
opening movie screen starts when the machine is
turned on. The initial pattern type selection screen
appears after touching the screen.
If you set the “Opening Screen” to “OFF”, the
initial pattern type selection screen appears when
the machine is turned on.
When the embroidery machine is purchased, “ON”
is selected.
F LED Pointer
The LED pointer function can be set on or off.
G Light
The brightness of the sewing light can be
adjusted.
The brightness of the sewing light can be set to
“OFF” or a setting between “1” and “5”. When
“OFF” is selected, the sewing light does not turn
on. When the machine is purchased, “5” is
selected. (Refer to page 17.)
H Speaker
The volume of operation sounds (which are
produced when a key is touched in a screen or a
button is pressed in the operation panel) and
alarm sounds (which indicate that an error has
occurred) can be changed.
The speaker volume can be set to “OFF” or a
setting between “1” and “5”. When “OFF” is
selected, no sound is produced from the speaker.
When the embroidery machine is purchased, “3” is
selected. (Refer to page 18.)
B
H
G
C
F
E
D
Loading ...
Loading ...
Loading ...