Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE
40
SYNC
Press the SYNC button on the touchscreen to toggle the SYNC feature on/off. The SYNC indicator is illuminated
when this
feature is enabled. SYNC is used to synchronize the passenger temperature setting with the driver
temperature setting. Changing the passenger’s temperature setting while in SYNC will automatically exit this
feature.
NOTE:
The SYNC button is only available on the touchscreen.
Blower Control Knob
Blower Control Buttons
Blower Control
Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower
speeds av
ailable. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can
be selected using either the blower control knob on the faceplate or the buttons on the touchscreen.
Faceplate: The blower speed increases as you turn the blower control knob clockwise from the lowest blower
setting. The blower speed decreases as you turn the blower control knob counterclockwise.
Touchscreen: Use the small blower icon to reduce the blower setting and the large blower icon to increase the
blower setting. Blower can also be selected by pressing the blower bar area between the icons.
NOTE:
On Uconnect 4C NAV With 12–inch display radios, pressing the blower control button below one turns the Climate Control
s
ystem OF
F.
Mode Control Knob
Mode Controls Button
Modes Control
Control Knob: Push the
Mode Control Knob to change the airflow distribution mode. The airflow distribution mode
can be adjusted so air comes from the instrument panel outlets, floor outlets, defrost outlets and demist outlets.
Touchscreen: Select M
ode by pressing one of the Mode buttons on the touchscreen to change the airflow
distribution mode. The airflow distribution mode can be adjusted so air comes from the instrument panel outlets,
floor outlets, defrost outlets and demist outlets.
Icon Description
Loading ...
Loading ...
Loading ...