Loading ...
Loading ...
Loading ...
IN CASE OF EMERGENCY
192
1. Remove the spare wheel, jack, and tools
from storage.
2. Using the lug wrench, loosen, but do not
remove,
the wheel nuts by turning them
counterclockwise one turn while the
wheel is still on the ground.
3. Assemble the jack and jacking tools.
Connect
the jack handle driver to the
extension, then to the lug wrench.
Assembled Jack And Tools
4. P
lacement of the jack is critical.
NOTE:
Keep
the jack and tools aligned with raising the
v
ehicle.
Ja
ck / Extensions Placement
Front Jacking Location
When changing a front wheel, place the
scissor j
ack under the rear portion of the
lower control arm as shown. Access the front
jacking location from behind the front tire.
Front Lifting Point
Front Jacking Location
Rear Jacking Location
Operate the jack using the extension with
j
ack hook
and the lug wrench. The exten-
sion tubes may be used but is not re-
quired.
When changing a rear wheel, assemble
t
he exten
sion with jack hook to the jack
and connect the extension tubes. Access
the rear jacking location from behind the
rear tire. Place the jack under the Jack
Lifting Point located on the rear axle low
-
er control arm bracket. Then locate the
s
lot in t
he jack lift plate onto the rear axle
Jack Lifting Point. Attach the extension
with jack hook extending to the rear of
the vehicle.
CAUTION!
Do not attempt to raise the vehicle by
jacking on locations other than those
indicated in the Jacking Instructions for
this vehicle.
Loading ...
Loading ...
Loading ...