Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE
20
NOTE:
Your vehicle is equipped with two key fobs,
one key f
ob can be linked to memory position
1 and the other key fob can be linked to
memory position 2.
The driver memory seat buttons are located
on the dr
iver door, next to the door handle.
Driver Memory Seat Buttons
Programming The Memory Feature
To create a new memory profile, perform the
following:
1. Cycle the vehicle’s ignition to the ON/
RUN posi
tion (do not start the engine).
2. Adjust all memory profile settings to
desired
preferences (i.e., driver’s seat,
outside mirrors, adjustable pedals (if
equipped), and radio station presets).
3. Push and release the set (S) button on
the memo
ry switch.
4. Within five seconds, push and release
either o
f the memory buttons (1) or (2).
The instrument cluster display will show
which memory position has been set.
NOTE:
Memory profiles can be set without the
vehicle in PARK, but the vehicle must be
in PARK to recall a memory profile.
To set a memory profile to your key fob,
refer to “Linking And Unlinking The
Remote Keyless Entry Key Fob To
Memory” in this section.
Linking And Unlinking The Remote Keyless
Entry Key Fob To Memory
Your key fob can be programmed to recall
one of two pre-programmed memory profiles
by pushing the unlock button on the key fob.
NOTE:
Before programming your key fob you must
select th
e “Personal Settings Linked to Key
Fob” feature through the Uconnect Settings.
Refer to “Uconnect Settings” in “Multi
-
media” in your Owner’s Manual for further
informati
on.
To program your key fob, perform the
following
:
1. Cycle the vehicle’s ignition to the OFF
position
.
2. Select a desired memory profile 1 or 2.
NOTE:
If a
memory profile has not already been set,
r
efer to
"Programming The Memory Feature"
in this section for instructions on how to set
a memory profile.
3. Once the profile has been recalled, push
and rele
ase the set (S) button on the
memory switch.
Loading ...
Loading ...
Loading ...