Loading ...
Loading ...
Loading ...
GETTING TO KNOW YOUR VEHICLE
16
2. Perform one of the following methods to
lock the vehicle:
Push lock button on the interior power
door lock switch with the driver and/or
passenger door open.
Push the lock button on the exterior
Passive Entry Door Handle with a valid
key fob available in the same exterior
zone (refer to "Keyless Enter- N-Go —
Passive Entry" in "Getting To Know Your
Vehicle" for further information).
Push the lock button on the key fob.
3. If any doors are open, close them.
The vehi
cle security alarm will set when you
use the p
ower door locks, or use the key fob
to lock the doors. After all the doors are
locked and closed, the vehicle security light,
in the instrument panel cluster, will flash
rapidly for about 16 seconds to indicate that
the alarm is being set. After the alarm is set,
the vehicle security light will flash at a slower
rate to indicate that the system is armed.
To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:
1. Push the unlock button on the key fob.
2. Grasp
the Passive Entry Unlock Door
Handle w
ith a valid key fob within 5 ft
(1.5 m) o
f the passive entry door handle. If
equipped,
refer to "Keyless Enter-N-Go —
Passive Entry" in "Getting To Know Your
Vehicle" for further information.
3. Place the ignition out of the “OFF” posi-
tion.
The
vehicle security alarm is designed to
protect y
our vehicle. However, you can create
conditions where the system will give you a
false alarm. If one of the previously
described arming sequences has occurred,
the vehicle security alarm will arm regardless
of whether you are in the vehicle or not. If
you remain in the vehicle and open a door,
the alarm will sound. If this occurs, disarm
the vehicle security alarm.
If the vehicle security alarm is armed and the
battery b
ecomes disconnected, the vehicle
security alarm will remain armed when the
battery is reconnected; the exterior lights will
flash, and the horn will sound. If this occurs,
disarm the vehicle security alarm.
DOORS
Power Side Steps — If Equipped
The Power Side Steps will extend a step for
easier entry and exit of the vehicle.
When configured for “Auto” mode, the Power
Side Step
s will deploy when either the
driver’s or passenger’s side door is opened,
or when the deploy setting is activated
through the touchscreen. When configured
for “Store” mode, the steps will stay in their
position but can also be deployed manually
through the radio.
If the vehicle speed exceeds 5 mph (8 km/h),
or if the
retract setting is selected in the touch-
screen, the steps will retract.
Refer to “Uconnect Settings” in “Multi-
media” in the Owner’s Manual for additional
i
nformati
on.
Keyless Enter-N-Go — Passive Entry
The Passive Entry system is an enhancement
to the vehicle’s Remote Keyless Entry system
and a feature of Keyless Enter-N-Go. This
feature allows you to lock and unlock the
vehicle’s door(s) without having to push the
key fob lock or unlock buttons.
Loading ...
Loading ...
Loading ...