Loading ...
Loading ...
Loading ...
STARTING AND OPERATING
160
LANESENSE — IF EQUIPPED
LaneSense Operation
The LaneSense system is operational at
speeds above 37 mph (60 km/h) and below
112 mph (1
80 km/h). It uses a forward
looking c
amera to detect lane markings and
measure vehicle position within the lane
boundaries.
When both lane markings are detected and
the drive
r unintentionally drifts out of the
lane while no turn signal has been applied
OR the driver departs the lane on the oppo
-
site side of the applied turn signal (if the left
turn sign
al is applied and the vehicle departs
to the right), the LaneSense system provides
a haptic warning in the form of torque
applied to the steering wheel to prompt the
driver to remain within the lane boundaries.
The LaneSense system will also provide a
visual warning through the instrument
cluster display to prompt the driver to remain
within the lane boundaries.
The driver may manually override the haptic
warning b
y applying torque into the steering
wheel at any time.
When only a single lane marking is detected
and the d
river unintentionally drifts across
that lane marking (no turn signal applied),
the LaneSense system provides a visual
warning through the instrument cluster
display to prompt the driver to remain within
the lane. When only a single lane marking is
detected, a haptic (torque) warning will not
be provided.
NOTE:
When operating conditions have been met,
the LaneS
ense system will monitor if the
driver’s hands are on the steering wheel and
provides an audible and visual warning to the
driver when the driver’s hands are not
detected on the steering wheel. The system
will cancel if the driver does not return their
hands to the wheel.
Turning LaneSense On Or Off
The LaneSense button is located on
the switch panel below the Ucon-
nect display.
NOTE:
If your vehicle is equipped with a 12–inch
U
connect
Display screen, the LaneSense
button is located above the display.
To turn the LaneSense system on, push the
LaneSense
button (LED turns off). A “Lane-
Sense On” message is shown in the instru-
ment cluster display.
To turn the LaneSense system off, push the
L
aneSense
button again (LED turns on).
NOTE:
The LaneSense system will retain the last
s
ystem st
ate on or off from the last ignition
cycle when the ignition is changed to the ON/
RUN position.
LaneSense Warning Message
The LaneSense system will indicate the
current lane drift condition through the
instrument cluster display.
Instrument Cluster Display
When the LaneSense system is ON; the lane
lines are
gray when both of the lane bound-
aries have not been detected and the Lane-
Sense telltale is solid white.
Left Lane Departure — Only Left Lane Detected
When the LaneSense system is ON, the
LaneSense Telltale is solid white when
only the left lane marking has been
d
etected
and the system is ready to
provide visual warnings in the instrument
cluster display if an unintentional lane
departure occurs on the left side.
When the LaneSense system senses the
lane has been approached and is in a lane
Loading ...
Loading ...
Loading ...