Loading ...
Loading ...
Loading ...
161
departure situation, the visual warning in
the instrument cluster display will show
the left lane line flashing yellow (on/off).
The LaneSense telltale
changes from
solid white to flashing yellow.
NOTE:
The LaneSense system operates with the
s
imilar b
ehavior for a right lane departure
when only the right lane marking has been
detected.
Left Lane Departure — Both Lane Lines
Detected
When the LaneSense system is ON and
both the lane markings have been
detected, the system is "armed" to provide
visual warnings in the instrument cluster
display and a torque warning in the
steering wheel if an unintentional lane
departure occurs .The lane lines turn from
gray to white and the LaneSense telltale
is solid green.
When the LaneSense system senses a lane
drift situation, the left lane line turns solid
yellow. The LaneSense telltale
changes
from solid green to solid yellow. At this
time torq
ue is applied to the steering
wheel in the opposite direction of the lane
boundary.
For example: If approaching the left side
of the la
ne the steering wheel will turn to
the right.
When the LaneSense system senses the
lane has been approached and is in a lane
departure situation, the left lane line
flashes yellow (on/off). The LaneSense
telltale
changes from solid yellow to
flashing yellow. At this time torque is
applied t
o the steering wheel in the oppo-
site direction of the lane boundary.
For example: If approaching the left side
o
f the la
ne the steering wheel will turn to
the right.
NOTE:
The LaneSense system operates with the
similar b
ehavior for a right lane departure.
Changing LaneSense Status
The LaneSense system has settings to adjust
the intensity of the torque warning and the
warning zone sensitivity (Early/Medium/Late)
that you can configure through the Uconnect
system screen.
Refer to “Uconnect Settings” in “Multi-
media” in your Owner’s Manual for further
i
nformati
on.
NOTE:
When enabled the system operates above
37 mph (60 km/h) and below 112 mph
(180 km/h)
.
Use of the turn signal suppresses the
warnings.
The system will not apply torque to the
steering wheel whenever a safety system
engages (anti-lock brakes, traction control
system, electronic stability control,
forward collision warning, etc.).
PARKVIEW REAR BACK UP
CAMERA
The ParkView Rear Back Up Camera allows
you to see an image of the rear surroundings
of your vehicle whenever the gear selector is
put into REVERSE or whenever it is manually
activated. When the gear selector is put into
REVERSE, the image will be displayed in the
Uconnect screen along with a caution note to
“check entire surroundings” across the top
of the screen. After five seconds this note
will disappear.
Loading ...
Loading ...
Loading ...