Loading ...
Loading ...
Loading ...
SAFETY
124
(Continued)
3. Pass the tether strap hook over the head-
rest behind the child seat, through the
tether st
rap loop behind the seat and over
to the right or left outboard tether strap
loop.
Tether Strap Through Center Tether Strap Loop
4. Attach the hook to the outboard tether
strap lo
op (see diagram). Tighten the
tether strap according to the child seat
manufacturer’s instructions.
Tether Strap Through Center Tether Strap Loop
And Attached To Outboard Tether Strap Loop
Installing Three Child Restraints:
1. Place a child restraint on each outboard
rear sea
t. Route the tether straps following
the directions for right and left seating
positions, above.
2. Attach both hooks to the center tether strap
loop, bu
t do not tighten the straps yet.
3. Place a child restraint on the center rear
seat. Ro
ute the tether strap following the
directions for the center seating position,
above.
4. Attach the hook to the outboard tether strap
loop.
Outb
oard And Center Seating Positions Shown
5. T
ighten the tether straps according to the
child se
at manufacturer’s instructions,
tightening the right and left tether straps
before the center tether strap.
WARNING!
An incorrectly anchored tether strap
could lead to increased head motion and
possible injury to the child. Use only the
anchorage position directly behind the
child seat to secure a child restraint top
tether strap.
Loading ...
Loading ...
Loading ...