Loading ...
Loading ...
Loading ...
157
Sense operating speed when the vehicle is in
REVERSE. The system will become active
again if the vehicle speed is decreased to
speeds less than approximately 6
mph
(9 km/h).
ParkSense Sensors
The four ParkSense sensors (six, if vehicle is
equipped with Active ParkSense), located in
the rear fascia/bumper, monitor the area
behind the vehicle that is within the sensors’
field of view. The sensors can detect obsta
-
cles from approximately 12 inches (30 cm)
up to 79 i
nches (200 cm) from the rear
fascia/bu
mper in the horizontal direction,
depending on the location, type and orienta
-
tion of the obstacle.
The six ParkSense sensors, located in the
front fas
cia/bumper, monitor the area in
front of the vehicle that is within the sensors’
field of view. The sensors can detect obsta
-
cles from approximately 12 inches (30 cm)
up to 47 i
nches (120 cm) from the front
fascia/bu
mper in the horizontal direction,
depending on the location, type and orienta
-
tion of the obstacle.
ParkSense Warning Display
The ParkSense Warning screen is located
within the instrument cluster display. It
provides visual warnings to indicate the
distance between the rear fascia/bumper
and/or front fascia/bumper and the detected
obstacle.
Refer to “Instrument Cluster Display” in
“Getting
To Know Your Instrument Panel” in
the Owner’s Manual for further information.
Enabling And Disabling Front And/Or
Rear ParkSense
Front ParkSense can be enabled and
disabled with the Front ParkSense switch.
Rear ParkSense can be enabled and disabled
with the
Rear ParkSense switch.
When the Front or Rear ParkSense
switch is pushed to disable the
s
ystem, t
he instrument cluster
display will show a vehicle graphic
of the Front or Rear ParkSense on/off state
for two seconds.
Refer to “Instrument Cluster Display” in
“Getting
To Know Your Instrument Panel” in
the Owner’s Manual for further information.
When the gear selector is moved to
REVERSE a
nd the Front or Rear system is
disabled, the instrument cluster display will
show a vehicle graphic with "OFF" on the
corresponding side. This vehicle graphic will
be displayed for as long as the vehicle is in
REVERSE.
NOTE:
Arc alerts from the enabled ParkSense
s
ystem, w
ill interrupt the five second
messages, and the instrument cluster
display will show the vehicle graphic with the
corresponding arcs and "OFF" message.
The Front or Rear ParkSense switch LED will
be on whe
n Front or Rear ParkSense is
disabled or requires service. The Front or
Rear ParkSense switch LED will be off when
the Front or Rear system is enabled. If the
Front or Rear ParkSense switch is pushed,
and the system requires service, the Front or
Rear ParkSense switch LED will blink
momentarily, and then the LED will be on.
ParkSense System Usage Precautions
NOTE:
Ensure that the front and rear bumper are
free of snow, ice, mud, dirt and debris to
keep the ParkSense system operating
properly.
Jackhammers, large trucks, and other
vibrations could affect the performance of
ParkSense.
Loading ...
Loading ...
Loading ...